It is no secret that I love houndstooth - - it's a beautiful pattern that is deceptively simple to make. And if there's anything that I love more than the deceptively simple, I don't know what it is.
For this project I chose
Kollage Happiness fingering weight 100% superwash merino wool in black and lilac. Each skein is 100g / 450 yards. I estimated that I would require about 1050 yards of each colour, so for safety I picked up 3 skeins of each colour intending to try for a finished work that was 28" wide x 70+" long (I wasn't too fussy about the length so long as it was more than 70") using a 12-dent heddle.
My challenges on this project came early. My first 12-dent heddle was broken adjacent to one of the holes, something I discovered only as I was about to begin threading the holes in my heddle. This required me to manually transfer the entire width of my warp to my second 12-dent heddle. Many profanities were heard
that afternoon, I will tell you. Thank you weaving gods for my double-heddle setup, so that I had a backup heddle ready to go while the Nerd repaired the defective heddle.
My next challenge was in threading the holes in my heddle. I think that the 12-dent heddle was actually the right call for this particular wool, however it is very challenging threading my 12-dent heddle with the hook provided with my loom. Because the hook itself barely fits through the heddle, let alone with wool, threading each hole was a challenge of wills requiring much to-ing and fro-ing, and I had more than half a dozen ends simply disintegrate as I was pulling them through a hole. This left me with several extremely short ends amidst many longer ends, and I probably lost more than 2-3" of warp in evening everything out.
I also had 1 end come through the hole only 2/3 of the way, leaving a twist of fiber on the back end of the heddle, something I did not notice until I had been weaving for a few inches. More cursing. At the end of the day, however, this did not pose an insurmountable problem as I simply worked the tag end of the wool towards the back of the loom as I advanced the warp to prevent it from ratcheting up the tension on the one warp thread as it got caught on the heddle. I can't even tell where it was in the finished piece, which is nice.
Although I think the 12-dent heddle was the right call for this fingering weight wool it was a close thing, and I found the wool had a real tendency to stick together making it difficult to get a clean shed. This was remedied by the judicious use of pick up sticks to help me manually force sticky warp threads apart, ensuring that my weaving errors were kept, if not to a minimum, to a dull roar.
I didn't do anything too fancy with this shawl, just a plain hemstitch at each end with a moderate fringe, but the simplicity works for this pattern, I think. I did add a little ceramic "M" at one corner as a signature (just in case the usual errors I included in the piece weren't enough to identify me!).
Right off the loom the finished piece was 26" x 74", and after washing and hanging to dry the shawl ended up being 24 1/2" x 72". I was pretty happy with the length (although I do prefer longer shawls as a rule and would probably go even longer next time) and even though I had more draw-in and shrinkage than I expected on the width, I think I could happily have gone a little narrower on the width, so this was not a bad result.
Like the baby llama, merino is another wool that sheds like a mother, but feels so soft in the hand that all is quickly forgiven. So long as there is a lint roller close at hand, anyways!
I love how this piece turned out and am keeping it for myself. I have rationalized that it's OK to be selfish
some of the time. Besides, my next project is a return to industrial scale tea towel fabrication as preparation for Christmas. Those will all be given away, so everything balances out.
I was hoping for a shawl that measured more than 70" long by 24" - 27", and the finished shawl after washing and trimming ended up being 72" x 26" - - right in the sweet spot.
